Vertical Glass Beveler
Kingsley North → Lapidary Equipment & Supplies → Glass Bevelers/ Horizontal Lapidary Units & Beveler
A Quality Beveler for Inside or Outside Curves. This Two-Station Unit Will Take 10, 8, and 6 Inch Wheels. Mounted on Base and Fully Operational.
Vertical Beveler and Edger Features:
Arbor with 1" x 23 3/4" shaft can be quickly disassembled (4 bolts) for pulley change or bearing inspection. Two ½" OD x 30" long plastic tubes provide optional drain system. Just squeeze tube ends, insert in drain ports and drain lines are in place. Water valves take ¼" OD plastic tube for gravity water flow or ¼" copper tube for pressure system. Gravity system will wet 10, 8 or 6 inch wheels. Speed (RPM) needed is determined by wheel diameter. The recommended 1,100 Surface Feet Per Minute (SFM) speed on the wheel rim can be obtained by; 420 RPM for 10" wheel, or 785 RPM for 8" wheel, or 1,100 RPM for 6" wheels. Choose the RPM that is needed for the wheel diameter you expect to use. If two wheel sizes are to be used, choose the faster RPM. Wheels turn toward the operator and up. Unit is available in 420 and 1,100 RPM. Specify RPM when ordering. Comes fully assembled with belt guard, 1/3 HP motor, instructions and guarantee.
Shipping from California - we will call with shipping quote