Diamond Drills - Kingsley North, Inc.

Suitable for gemstone, glass, ceramics and all other hard material. Shipping weight 4 oz. package of 100.
IMPORTANT!

Start hole by allowing only a minimum amount of drill tip to protrude beyond the collet or chuck jaws since shank size is only .020.

Once hole is started, adjust drill length as necessary.

Run at 10,000 rpm minimum or more.

Submerge in water or use constant flow.

Use drill press. Hand held tool not recommended.

Use rapid up or down motion when drilling, light to moderate pressure.

IMPORTANT: Always recognize that the drill tip must always have coolant. A combination of excessive speed, pressure, dwell without lifting the drill, will deprive the drill of water and the tip may overheat and poof!

Note: Automatic drills do not have sufficient pressure. Use hand feed.
DRILL BIT SIZE/Collet Size

.75mm - collet 1/32"

1.0mm - collet 1/32"

1.25mm - collet 1/16"

1.5mm - collet 1/16"

2.0mm - collet 3/32"

2.5mm - collet 3/32"

Remove from my wish list

Model 3-0994		Description .75mm Diamond Drill -Pkg-10		Price      $12.00		Qty Order
Model 3-0995		Description 1.0mm Diamond Drill -Pkg-10		Price      $12.00		Qty Order
Model 3-0996		Description 1.25mm Diamond Drill -Pkg-10		Price      $12.00		Qty Order
Model 3-0997		Description 1.50mm Diamond Drill -Pkg-10		Price      $12.00		Qty Order
Model 3-0998		Description 2.0mm Diamond Drill -Pkg-10		Price      $12.00		Qty Order
Model 3-0999		Description 2.5mm Diamond Drill -Pkg-10		Price      $12.00		Qty Order
Model 3-0994-25		Description .75mm Diamond Drill -Pkg-25		Price      $21.00		Qty Order
Model 3-0994-100		Description .75mm Diamond Drill -Pkg-100		Price      $75.00		Qty Order
Model 3-0996-25		Description 1.25mm Diamond Drill -Pkg-25		Price      $21.00		Qty Order
Model 3-0996-100		Description 1.25mm Diamond Drill -Pkg-100		Price      $75.00		Qty Order
Model 3-0995-25		Description 1.0mm Diamond Drill -Pkg-25		Price      $21.00		Qty Order
Model 3-0995-100		Description 1.0mm Diamond Drill -Pkg-100		Price      $75.00		Qty Order
Model 3-0997-25		Description 1.50mm Diamond Drill -Pkg-25		Price      $21.00		Qty Order
Model 3-0997-100		Description 1.50mm Diamond Drill -Pkg-100		Price      $75.00		Qty Order
Model 3-0998-25		Description 2.0mm Diamond Drill -Pkg-25		Price      $21.00		Qty Order
Model 3-0998-100		Description 2.0mm Diamond Drill -Pkg-100		Price      $75.00		Qty Order
Model 3-0999-25		Description 2.5mm Diamond Drill -Pkg-25		Price      $21.00		Qty Order
Model 3-0999-100		Description 2.5mm Diamond Drill -Pkg-100		Price      $75.00		Qty Order