Mounted Wet Belt Sander
This sander features the #1-0925 unit (above) with 1/3 HP, 110V motor and belt guard mounted on Lami-I-Cushion base ready to plug in and operate. Water valve & spray nozzle are built in for easy hookup. Water valve takes 1/4" OD plastic tube for gravity water flow or 1/4" copper tube for pressure system. If needed, drain system can be provided by 1/2" OD plastic tube. Just squeeze tube end and insert it in drain port. Over flow can then drain from sander tank. Takes 3" x 24" sanding belt. Measures 25"L x 13"W x 19"H.
This item ships from California. (Shipping calculated at checkout will not be accurate)
Instruction Manual
Schematic
Model
1-0926 |
|
Description
Mounted Wet Belt Sander |
|
Price
|
|
Qty
|
