Crystalite Triple Ripple Drills

Twice the life and cutting rate of standard diamond drills. This music wire diamond drill has three flutes to allow cuttings to flush away and decreases frontal contact and drag. As the edges wear, fresh diamond in the flutes maintains the cutting action. Recommended RPM - 10,000.
IMPORTANT!

Start hole by allowing only a minimum amount of drill tip to protrude beyond the collet or chuck jaws since shank size is only .020.

Once hole is started, adjust drill length as necessary.

Run at 10,000 rpm minimum or more.

Submerge in water or use constant flow.

Use drill press. Hand held tool not recommended.

Use rapid up or down motion when drilling, light to moderate pressure.

IMPORTANT: Always recognize that the drill tip must always have coolant. A combination of excessive speed, pressure, dwell without lifting the drill, will deprive the drill of water and the tip may overheat and poof!

Note: Automatic drills do not have sufficient pressure. Use hand feed.
DRILL BIT SIZE/Collet Size

3/4mm - collet 1/32"

1.1mm - collet 1/32"

1.4mm - collet 1/32"

1.8mm - collet 1/16"

2.1mm - collet 1/16"

Remove from my wish list

Model 1-0439-100		Description Package of 100 - Size 3/4mm		Price      1 - 2 Price $198.00 3+ Price $178.00		Qty Order
Model 1-0439-25		Description Package of 25 - Size 3/4mm		Price      1 - 2 Price $70.00 3+ Price $62.00		Qty Order
Model 1-0439-6		Description Package of 6 - Size 3/4mm		Price      1 - 2 Price $28.00 3+ Price $24.50		Qty Order
Model 1-0441		Description Size 1.1mm, collet 1/32"		Price      $5.00		Qty Order
Model 1-0441-100		Description Package of 100 - Size 1.1mm		Price      1 - 2 Price $198.00 3+ Price $178.00		Qty Order
Model 1-0441-25		Description Package of 25 - Size 1.1mm		Price      1 - 2 Price $70.00 3+ Price $62.00		Qty Order
Model 1-0441-6		Description Package of 6 - Size 1.1mm		Price      1 - 2 Price $28.00 3+ Price $24.50		Qty Order
Model 1-0463		Description Size 1.4mm, collet 1/32"		Price      $5.00		Qty Order
Model 1-0463-100		Description Package of 100 - Size 1.4mm		Price      1 - 2 Price $198.00 3+ Price $178.00		Qty Order
Model 1-0463-25		Description Package of 25 - Size 1.4mm		Price      1 - 2 Price $70.00 3+ Price $62.00		Qty Order
Model 1-0463-6		Description Package of 6 - Size 1.4mm		Price      1 - 2 Price $28.00 3+ Price $24.50		Qty Order
Model 1-0483		Description Size 1.8mm, collet 1/16"		Price      $5.00		Qty Order
Model 1-0483-25		Description Package of 25 - Size 1.8mm		Price      1 - 2 Price $70.00 3+ Price $62.00		Qty Order
Model 1-0483-6		Description Package of 6 - Size 1.8mm		Price      1 - 2 Price $28.00 3+ Price $24.50		Qty Order
Model 1-0484		Description Size 2.1mm, collet 1/16"		Price      $5.00		Qty Order
Model 1-0484-100		Description Package of 100 - Size 2.1mm		Price      1 - 2 Price $198.00 3+ Price $178.00		Qty Order
Model 1-0484-25		Description Package of 25 - Size 2.1mm		Price      1 - 2 Price $70.00 3+ Price $62.00		Qty Order
Model 1-0484-6		Description Package of 6 - Size 2.1mm		Price      1 - 2 Price $28.00 3+ Price $24.50		Qty Order
Model 1-0439		Description Size 3/4mm, collet 1/32"		Price      $5.00		Qty Order
Model 1-0483-100		Description Package of 100 - Size 1.8mm		Price      1 - 2 Price $198.00 3+ Price $178.00		Qty Order